Hangar 9 P-40E Refurb

Hangar 9 P-40E Refurb

Postby Dale » Sun Oct 27, 2013 10:12 am

And it starts again!
IMG_7494.JPG

P-40 036.jpg

My father's (Wayne) Hangar 9 P-40 .60. Perhaps can be written as Hangar Queen P-40.
This was bought several years ago 2nd hand from a chap in Hamilton minus engine.
Currently has a pumped OS91 4st, however has only had a couple of flights on it since buying, and that is largely due to retract issues.
The retract issues are on the path to redemption, and after a request from him, we'll give it an overall tidyup.
The colour scheme is awful. For a start, its the AVG Flying Tigers (like all other P-40 ARFs), it is in horrible shades of dark colours, its glossy, and its iron on. So here goes the latest un-ARF'ing thread.
This model is long out of production, with no spares available, so a request to you guys, if anyone has any parts, or bits left of one of these in the shed somewhere would be keen to purchase. Please reply here or send me a message at dale_bradly(at)hotmail.com
Dale
 

Re: Hangar 9 P-40E Refurb

Postby Dale » Sun Oct 27, 2013 10:15 am

As factory supplied, it has mechanical retracts, driven by the typical centre mounted retract servo. Ive spent ages playing with this, trying different servos, messing about with linkages, removing slop etc and eventually gave up on it, determined to make something more reliable and robust. The only flights (2 or 3) it has had have been on the mechanicals, and each one required adjustment afterwards, so these drove us nuts.
Some while later, decided to try Wingspan retracts offerings.
These failed on the bench, and cant extend the leg, so have since been removed the manufacturer contacted for comment. I await their reply, which i don't think is coming.
Unfortunately, this left a bitter taste in ones mouth, as these are rubbish. Well, the rotating ones are anyway.

Image

An exhaustive hunt began for the "perfect" P-40/Corsair retract.
-Electronic
100 deg extension
Robust

And nowhere have i found this item.

However, i do have a set of Sierra Precision air retracts, so these are going to be made to fit.
DSC06286.JPG

So i began that process by stripping the wing. And in case anyone is wondering, i took 118g of iron on covering off the wing
Attachments
DSC06356.JPG
Dale
 

Re: Hangar 9 P-40E Refurb

Postby Dale » Tue Oct 29, 2013 4:12 pm

Wing is in pretty good shape, somewhere had previously had a knock to the leading edge which was repaired.
Have sheeted the previously open wing bays ready for glassing, followed by a once over with the filler and sandpaper.
DSC00502.JPG

Ailerons were held in with CA fuzzy hinges, so was a doddle to cut these off. A quick sand, and then recovered with Solartex. (P-40 has all control surfaces fabric covered). Rehinged with Hingepoints.
Next stage is to mount the retracts and subsequently the distinctive retract housings and gear bays, followed by the underwing central fairing and cannon.
Once all this is fitted, i'll glass it all in place and paint.

Image
Pic of a real one from random web search interwebs (http://peoplespoliticsiii.yuku.com/topi ... m809Pl9s5s)
Note the u/c and centre fairings. (and also for those who aren't familiar with it, why retracts are so hard on these!)

Colour scheme has yet to be decided.
Dale
 

Re: Hangar 9 P-40E Refurb

Postby Dale » Mon Feb 17, 2014 8:26 pm

Back into it!
Since i last posted, I've moved to the Mainland, so this (along with most of my model stuff) has been in storage for a while. Settled down south now, so unpacked it and got back into it.
Spent a while finding all the bits, looking it over and getting my head back into the project.
First thing i then did was made some guns for the wing.
Here's the real one:
Image
(Kiwi Aircraft Images, Motat P-40)
Note how they are located in the lower half of the leading edge.
I found some 5mm brass tube, and some 12mm pine dowel, rounded the end, bored a hole through it, and then glued into a matching hole in the leading edge, using a little jig to hold things in place.
Mine, during some fairing and filling:
Image
The only major build task on the wing is the centreline fairing (as in fullsize pic above), but might put this off for a bit, and glass the wing first, then come back and deal with the retracts and various fairings.

I've also got into the fuse, which will take a bit of work.
Image
during the stripping phase. Note the awful wrinkly covering.
15 min later after using and abusing the missus' hair dryer:
Image
I have to say, i much preferred the build quality of the "chinese" World Models airframes over this "american" airframe. (Of course, it isn't made in the US). Just seems the wood quality, and even the design is pretty average, despite their brand marketing hype.
Dale
 

Re: Hangar 9 P-40E Refurb

Postby Dale » Sun Feb 23, 2014 6:58 pm

Haven't done much real work on it this week, other than fill, sand and seal the top side of the wing. Will likely glass it soon.
Where i have put some effort (and money!) into is getting stuff sorted:
There are several areas of this airframe i am not happy with for various reasons, in no particular order:
Cowl: Looked "wrong", and genuine replacements are not available.
Tail group: "sheet" surfaces (as seen in previous pics) looked wrong and made it look too toy-ish
Fin/rudder shape just looked off
underwing plastics (belly fairing, gear covers etc all looked wrong.
Canopy broke during removal and again original can't be sourced.
Wing fillets are a "maybe", haven't decided yet.
After many hours of interwebs research, what we are going to do is turn it into a Top Flite P-40!
Well, sorta.
The Top Flite Gold Edition Kit is very very similar in size, so i'm going to obtain, and fit the pertinent bits from the TF kit to sort out these areas. (e.g. there is only 6mm difference in width between the TF and H9 firewall widths).
On order, but several weeks away, are a pair of aftermarket fibreglass cowls (i.e. better than factory) for the TF P-40, from http://www.fiberglassspecialtiesinc.com/
As part of this, i've been spending a bit of time doing some CAD to plan things out. One thing that is really helpful is TF provide PDF templates of their diecut parts, which i then imported into cad software, and scaled to the model size, along with threeviews of the real thing. Allows me to pretty easy see where things are/should be etc.
I won't bore you to death with screens of autocad drawings of ribs and formers, but it has proved quite handy.
Image a sample, here i was playing around with the TF rudder shape on the fullsize outline. Here's the same outline with the current H9 fin/rudder: Image
I'm not into hard out accuracy, if it looks like the real thing during a flypast, that's good enough for me!
As well as the cowls, have ordered some parts from Top Flite, so until these get here, there isn't a whole heap of woodwork i can do yet, but will continue on with the wing.
Dale
 

Re: Hangar 9 P-40E Refurb

Postby Dale » Sun Mar 02, 2014 5:03 pm

Have glassed the top of the wing with 25gm cloth and epoxy.
Then turned the wing over and got busy underneath.
To fit the Sierra retracts in, we needed to adjust the mounting blocks. The original mechanical units were top mounted, (i.e. the mounting plate was fitted to the uppermost part of the retract (when up the right way), deep in the wing.) The Sierras are bottom mount, thus needing to be fixed to the underside of the wing.
Some hardwood blocks were fitted, sitting on the original mounts; the top spar, the adjacent ribs, and just about anything else nearby.
These were then trimmed to put the retracts where i wanted them.
This was a bit of a challenge, needing to incorporate all the various angles, rotations and extensions.
The end result is they are in and do everything they should, but the tradeoff is that when extended, the legs stick out (when viewed from front/behind) parallel to the wing underside's dihedral, and not vertical as per scale. (I think to be correct they would only rotate something like 83°, not 90°) I could have gone the other way, had then stick out vertical, but then they would be at a funny angle in the already small wheel bay and look odd in flight. I'll restate my belief that "perfect" retracts for P-40's this size do not commercially exist.
Image
Wheels are 4" Robart Scale, look excellent, if a little heavy.

Once that was sorted, got to work on the fairings.
In the pic above, you can see the wheel well. This is a new pair of H9 items, but in the interests of durability and looks, these have been faired and glued in, and will be glassed in, so there won't be any edges or coming unstuck.
Re leading edge fairings, Check this pic, on the left is the original H9 gear fairing, on the right is a TF one, I likes this much better! To the rear is the other TF one unassembled. TF might be slightly too big, but looks about right.
Image

Have not yet cut gear slots, Might consider doors in these (the real one has two doors in each fairing). Probably not though.
These fairings will get also get glued, blended and glassed in for seamless jointing.
Image

One other thing as part of this fitment, i had to pretty much remove the lower spar to allow the retracts to fit in. To replace this, and still leaving room for the gear, i cut a slot along the spar either side, and have epoxied and 3mm steel wire into it, across the gap. With it missing, the wing was pretty solid, but now with it in, it's even stiffer. Can be seen as the line between the retract and wheel well.
Image
Dale
 

Re: Hangar 9 P-40E Refurb

Postby Dale » Sun Mar 16, 2014 7:32 pm

In the last couple of weeks, i have made up both the retract fairing covers, glued, blended and glassed them in. Have then started giving the wing the overall weave fill and smooth. This time i pasted a pretty thick coat of nitrocellulose filler all over, (also known as spot filler, glazing putty, knifing compound and no doubt other names). dries quick and reasonably hard enough, then sands off real easy. I have previously used a second coat of epoxy, and other guys have used car bog. (I've tried car bog previously, but wasn't happy with it.)
(Image

During the week, a nice package arrived. The missus took one look at the size of the box and asked if "that is another plane". No, just parts for one.
Image
I had placed an order with the Great Planes/Tower/Topflite empire for some parts. They sell individual parts and die-cut sheets for their models, and at pretty reasonable prices. (i.e. a sheet of die-cut parts is only 2-3 US$). As i had previously converted their die-cut patterns to CAD at the correct size i could have cut them myself the old fashioned way, but still would have had to buy wood anyway, and i needed to get a canopy, (i.e. pay for shipping) so just got the whole shooting match from them. Interestingly, some of the parts are die-cut, and some are laser cut, i guess they are slowly moving into the 21st Century.
Obviously i also grabbed the Top Flite plans to put it all in perspective. Just spent an hour studying the plan! The Top Flite instruction manuals are a download from their website, so now know all about the TF kit, and can now relate this to the H9 items sitting on the workbench. (and the white plastic items in the pic are the panels inside the cockpit rear windows, another "maybe" item.)

So the first item to build is the new tailplane. Kit building is so much fun! In about an hour, i had it framed up.
Image
Is really interesting to note how different in shapes they are. You would think that when building a model, you'd start with a scale outline. Apparently not. The tailplanes have diffferent aspect ratios, and moreso different leading edge sweeps. Similarly, here's the rudders pre assembly:
Image

So will carry on assembling the new tail surfaces over the coming week. Once that is substantially done, with then cut out the original ones and figure out how to join the two brands together.
Since taking the rudder photo, i realised one other thing that really looks awful: The tailwheel. If you look back at the previous pic of the fuse, you can see it hanging (in typical cheap'n'easy ARF style) off the rudder, wheres the real thing it is well forward, can see it on the edge of the plan photo. (somewhere in the vicinity of the servo cavity on the rear fuse).
Will i do anything about that i am wondering...
Dale
 

Re: Hangar 9 P-40E Refurb

Postby Dale » Mon Mar 24, 2014 1:16 pm

I'd forgotten how pleasurable building from a kit is as i put together the new tail feathers. Construction seems to consist of gluing large pieces of tree together, then planing and sanding to shape, so there is quite a bit of wood(weight) in these.
Image
Compare on the above pic, the new bits and the original fin/tailplane assy.
Still got a lot of sanding/blending of the bits.
Have cut the original tail section off the fuse, to enable work to start on getting the bits together. I won't be gluing them in though until the front end is well on the way though, so they aren't getting in the way. Sheeted surfaces will be glassed, and the open structures will be covered with SolarTex textured iron on covering, just like my Harvard.
Deserves a test assy though!
Image
Image
Dale
 

Re: Hangar 9 P-40E Refurb

Postby Dale » Sun Apr 13, 2014 7:12 pm

Been ages since i updated, so here's a bit. I have done a bit lately, got several jobs out of the way.
First thing i tackled was the wing fairings.
The P-40, like most low wingers that had speed as a design criteria, has substantial wing root fairings. (I believe this is because there is a large amount of interference drag caused at the wing/fuse joint, so the fairings are to try and minimize this somewhat).
The T/F kit has substantially bigger ones, so after a quick check of some photos of real P-40's to check they are in the ballpark, i got busy.
Here's the Top Flite plan against the H9:
Image
So whipped them up, usual story of bottom sheet shaped to suit wing, rolled top parts. Has 3 small ribs on the inside, and the front 3rd or so is solid balsa sanded to shape.
Here's a better comparison:
Image
!!!
Next thing i did was a new tailwheel.
The lower rear fuse is a solid balsa block, so fitted some ply to it inside and out as a bearing surface, and whipped up a new leg, and fitted a 1.25" wheel. Currently is castoring only, if it becomes impossible to steer on ground, might link it back to rudder by springs. As the rudder servo is immediately adjacent and external, linking it directly is going to take too much thinking.
Image
Next thing i got onto was the not insubstantial underwing fairing.
Again, adapted T/F's item to suit. Is builtup, with about 5 ribs under the sheeting.
A shaped solid block behind the wing completes it.
Image

I then opened out the gear extension slots. I had thought about some form of gear doors, but quickly gave this idea up. As (relative) simplicity and reliability are two of my goals, gear doors didn't fit with this, and surely this would be more weight again.

Because she now has a full set of new feet for the first time, need another test assembly!
Image

Have been toying with making it a "K" version:
Image
(Kiwi Aircraft Images http://www.kiwiaircraftimages.com/pages/a92p40a2.html)
The main obvious difference is the fillet on the fin. I wonder what the punters think?
P-40E: (imagine the gap filled in obviously!)
Image
P-40K:
Image

I have made up the platform that the tailplane will sit on, but this is not fastened yet, and won't be until after the front end's makeover.

And the last bit:
You all looked at the pic of the underwing fairing, and wondered what that dark item on the centreline was. Well, its for this:
Image

One of them things you purchase once thinking you'll use and never do:
For those who don't know it, is a self contained bomb and release mech from Hobbyking and elsewhere.
Image
I stripped the working parts out of the pylon assy, and made it fit into the wing fairing. Is servo operated, making it work, and be accessible/repairable had me stumped, but eventually just semi-permanently mounted the servo in the front part of the underwing fairing, and joined it to the slide mech via a short bowden cable.
Image
1:1 P-40's use some horrible system of mounting underfuse items on multiple struts, but i just wasn't going there. Also briefly considered hanging one under each wing, which would have been simple, (just use the whole factory bomb system as is) but then thought about more weight again, would there be drag issues if only one dropped etc etc so one on centre it is.

I expect the new cowls are only a couple of weeks away, so when they arrive i can get into the front end, which should go pretty smoothly. Once that it sorted, then i'll fix the tailplane and fin, then head toward glassing the fuse.
Dale
 

Re: Hangar 9 P-40E Refurb

Postby Dale » Thu Apr 24, 2014 8:24 pm

Easter was last weekend, and as i live nearby, I spent a good part of the weekend at Warbirds over Wanaka.
Amongst all the good-ery that was there, i spent some time checking out a "real" P-40, ZK-RMH, formerly NZ3009, which is a former RNZAF aircraft. Although it now wears Chinese markings, it has previously been in RNZAF colours.
I also spent some time chatting with the pilot, Stu Goldspink, which was interesting and enlightening.
Image

Came home full of enthusiasm, and got into the next bit, which is the canopy area.

I had to replace the canopy, as the original H9 example didn't survive being removed. The Top Flite example was of course the go, so i cut this out and decided where to put it.
This quickly led to having to sort something else first, which was the rear canopy.

The P-40 has in interesting canopy, in that the rear fuse behind the pilot is scalloped, and then glassed over, presumably to allow some form of rearward view. (This is a decade before the widespread use of the bubble canopy).
Check this pic: (Kiwi Aircraft Images)
Image

The original matching area:
Image
You can see the inward rolled area, and the screw holes show the outline of the original H9 canopy. The pencil lines are the new TF canopy outline.
This would be a bit arkward making the two brands meet at this point, so i got around this by cutting out them scallops, and fitted the TF window recesses.
Image
Note the turtle deck is sheeted foam. (to simplify mass production i presume).

Then glued in the TF cutouts with my favourite modelling glue, Gorilla. (Cause it's strong, light and fills gaps!)
Image

And the result looks like a P-40!
Image
Image

This has created one relatively small issue, in that the fuse immediately in front of the canopy isn't high enough, i.e. the front edge of the canopy isn't actually sitting on the fuse. This needs to be built up so the canopy fits properly, but this isn't a big issue, as this area is about to get an extreme makeover to make the TF cowls work, which should be underway in the next couple of weeks.
Dale
 

Re: Hangar 9 P-40E Refurb

Postby Dale » Wed May 07, 2014 8:27 pm

This deserves a midweek update.

Came home yesterday to find a package at the door. A package i have been waiting on for several months.

What was in this package?

Among other things, what may be the singular most coolest, awesomest and just plain fantastic model related item i have ever purchased:
Image

And if it isn't clear, this is what it is and where it goes:
Image
Image

From Keleo Creations, https://www.keleo-creations.com/
Check them out if scale exhausts is something you could be interested in. Keleo was very helpful, sending me pdf drawings, measurements and advice prior to me pushing the buy now button, so many thanks.

There is a level of irony here, in that this exhaust is built specifically for the Hangar 9 P-40 +OS 91 4st. (Each exhaust is custom made to suit the specific airframe and engine combo as you specify.)
While this is correct in this case, at the same time i am doing my best to convert this airframe from a Hangar 9 to Top Flite. (Keleo doesn't specifically offer a Top Flite P-40+ OS91 combo exhaust).
However, the two airframes are similar enough that i will make it work. Previously stated, but it breaks down like this. The firewall, (and airframe aft of), including the mount, thrustline, right thrust, downthrust etc etc are all Hangar 9. I am then dressing this with Top Flite cowls.

In the first pic, adjacent the Keleo name, is two fuel connection barbs. The lower one, which has a supplied length of tubing on, is a drain (plugged except when required, e.g. refueling) and the upper one is for tank pressurization.
The exhaust attaches to the engine by the the standard exhaust port screwed pipe fitting, and two flanges that bolt with the the engine mounting. Can't be allowed to touch anything else, otherwise cracking will result. In the initial pic, you can see i have been too lazy to bolt it on properly. It may also appear to be twisted/offset, this is because it has side thrust built in. (this is why the bolting flanges are different sizes).

Weighs 111g, the standard OS exhaust is 50g.

This package also contained some fibreglass bits, from Craig at http://www.fiberglassspecialtiesinc.com who i have used before for cowls. Supply a great product, at a good price. These two US based companies worked together to combine shipping to me (at a considerable saving to me), so many thanks guys, and hopefully more work from NZ goes their way.

Image

From left to right: Radial cowl for different project, P-40 lower cowl, P-40 lower cowl (inverted) and P-40 carb inlet scoop. Obviously i grabbed two lower cowls. (Just in case might need another one someday...)
These lower cowls are the same size and shape as the genuine T/F one, but is one piece fibreglass, as opposed to 4 piece ABS plastic, so a lot less work to make a complete cowl.

So very quickly threw the plane together to grab some pics.
These are quite literally just sitting in place, nothing is lined up or sized yet. (even the spinner is the wrong size). This is the work for the coming weeks. But looks good so far, and definitely meets my criteria of looking the part!
Image
Image
Image
Image

If i haven't already mentioned it, the missing upper part of the cowl is built-up, so hence why the 'glass cowl is only "half".
Some youtubes of the exhaust:


Dale
 

Re: Hangar 9 P-40E Refurb

Postby Dale » Wed May 07, 2014 8:43 pm

And the "Radial cowl for different project":
Image
But this is for some other time. (Did anyone say 50cc?). For those that are familiar with it, my still-not-finished Typhoon fuse can be made out behind for scale. (black plastic bag).
Dale
 

Re: Hangar 9 P-40E Refurb

Postby tigger » Thu May 08, 2014 4:00 pm

Wow,just tossed all my gliders in the rubbish can and will look for a P-40 to put an exhaust on,Way too cool Dale.
Cheers Tigger
tigger
 
Posts: 147
Joined: Tue Dec 31, 2013 8:07 am

Re: Hangar 9 P-40E Refurb

Postby Dale » Thu May 08, 2014 8:06 pm

Cheers Tigger.
Hope you only joking about the gliders. Just strap a motor on the front!

Found this thread which is an electric conversion of the same H9 P-40 into NZ3009. Quite different to mine, but an interesting read.
http://www.rcgroups.com/forums/showthre ... 251&page=1
Dale
 

Re: Hangar 9 P-40E Refurb

Postby tigger » Thu May 08, 2014 9:32 pm

Yeah,had a look at RCGroups P-40 but i feel it's not quite right around the cowl area. My moneys on your one. I think you are at the enjoyable part of your project and it will be great watching it all come together.
Spot you later,Tigger
tigger
 
Posts: 147
Joined: Tue Dec 31, 2013 8:07 am

Re: Hangar 9 P-40E Refurb

Postby Dale » Sun May 11, 2014 6:06 pm

I took the exhaust to show some club members, got plenty of oohhs and aahhs :D

So with them bits having arrived, it was into the front end.
This was always going to be a challenge, with the mating the two brands together. With the cowl and spinner being a specific size, obviously any and all woodwork had to be modified to suit these.

As well as this, of course i have to get the exhaust into the front end. This took a bit of head scratching, i considered making the upper cowl out of removeable fibreglass panels, but just decided to do a modified version of the TF plan.

I also had to get the front end to a better looking size and shape. The P-40 has quite distinctive curves in the cowl area, so these have to be somewhere correct.

So the first part is to build up the upper cowl. In TF's, you just glue in large blocks between the ply spinner ring and the firewall, and sand them to shape. I went for a sheeted nose, party to cut weight, and partly cause i didn't have decent thick balsa to follow their plan!
Image
Build up in progress. You can also see sheeting on the top, building up the top to the correct height and shape. (previous post refers to the canopy not fitting properly in this area).

Image
Next stage. I strip planked this area due to the numerous curves involved.

Image
And where it is at at this time. (excuse the horrible mess of filler!)
It will be noted that i cut the cowl flaps off, these will be reattached later.
The TF and H9 noses are different lengths, when measured from the wing leading edge to the prop driver face, with the TF being about 20mm longer. (Of course this is then what length the cowl is made to suit).

Predicting nose weight will required in future, i elected to push the engine as far forward as possible, and got it about 14mm further forward the the H9 instructions. This is the limit of the included engine mount, and if i went any further forward, i would then have to (because of the right thrust) then have to move the engine mount sideways, thus moving the blind nuts embedded in the firewall etc etc. So 14mm it was to be.
I did have to then shorten the cowl, otherwise the cowl flaps would be in the wrong place under the wing, hence why they are removed at this time.

Good progress, but still got plenty of work up front, gotta sort out a cowl attachement point at the front (i.e. behind the spinner), exhaust ports, fuel proofing, blending, sanding, cowl cutouts and the top scoop to attach yet.

Not obvious, but if you compare the area at the front of the wing dowel bulkhead (i.e. bottom of the fuel tank bay), i have cut this off at an angle, with the ultimate goal of more space between this plate and the bottom (inside) of the cowl. More on this later.
Dale
 

Re: Hangar 9 P-40E Refurb

Postby Dale » Sun May 18, 2014 6:49 pm

Haven't done a huge amount this week, but what we do have is this:
Image
This is the underside of the nose area. In front is the inside of the new upper cowl, the firewall is visible with the blind nuts in place, immediately behind is tank bay, which i have cut the bottom off.
I have cut the bottom off this so i can raise the bottom up, because in between the floor of the tank bay and the inside of the cowl will sit the retract fill valve, fuel fill valve and fuel vent hardware, as well as holes for cooling airflow. (These items will sit directly above the cowl flaps.)
I glassed the inside of the upper cowl, to give the strip planking some more rigidity, and also fuelproofed from the spinner ring to the rear of the tank bay inclusive.
I'll sort out the throttle pushrod and tank mounting before gluing the new tank bay floor in place.

Now excuse the slightly alternate reality look of these images: (They are upside down)
Image
Image
The exhaust (and engine) sitting in place. Got a lot to do yet, this is only loosely sitting, and got a bit of work around trimming the hole in the cowl for the exhaust. Eventually will end up with a sausage shaped slot for the exhaust to poke through, and will fit some aluminium tape around the edges for heat protection.

Finally, a pic of the engine/exh in place, sans cowl.
Image
Dale
 

Re: Hangar 9 P-40E Refurb

Postby tigger » Wed May 21, 2014 9:46 pm

Hey there Dale, the engine and exhaust fitting is coming along a treat and really the engine and cowl shape are made for each other. Now this is where you may be able to help me out. You manage to take beautiful clear shots of your plane for us all to drool over,can you share just how you achieve this. Mine have deteriorated somewhat since i have changed my lighting above the work bench to fluorescence.
Cheers Tigger
tigger
 
Posts: 147
Joined: Tue Dec 31, 2013 8:07 am

Re: Hangar 9 P-40E Refurb

Postby Dale » Thu May 22, 2014 7:38 pm

Hey Tigger, what you don't see is the remaining two-thirds of the photos i take that aren't worth keeping! I do spend a bit of time mucking around taking photos.
I'm generally using my SLR for pics, (getting it covered in balsa dust in the process), and as you well know, sorting the white balance is the first thing! You can see the same thing in my pics, one ones on the workbench/garage are under fluro and set right, i then came inside and the one of the fuse inverted in the last post i didn't set that, hence why the yellow tint to it under incandescent lighting. I often use aperture priority so i can sort the focus at the expense of everything else.
Dale
 

Re: Hangar 9 P-40E Refurb

Postby compy260 » Fri May 23, 2014 11:12 pm

Looking good Dale. Its really coming together. :) :)

Kittyhawk.jpg
compy260
 

Next

Return to Build Threads

Who is online

Users browsing this forum: Bing [Bot] and 0 guests

cron